Add：Shanghai Fengxian District City Weng Lu Xiao No. 138
Tel：86-21-37837778
Fax：86-21-37837566
E-mail：jingyinze@163.com
Technical Parameter
*Working width：1800mm
*Max speed：150m/min
*Dimension：21800mm×3930mm×3500mm
*Guiding paper roller: Upper, front ￠135mm Upper, behind ￠135mm
*Slow transmitting paper roller: active roller￠135mm passive roller￠135mm
tension roller￠85mm hang roller￠100mm
absorption transmitting paper roller：￠100mm
*Electricity: 380V 50 Hz Total Powers: 9.1kw
A .Parameter:
This is conveyor bridge is designed for transport single-side corrugated paper by the top of the single facer to the multiplex pre-heater.
B . products characteristics :
1. Adopts suction tension device, use high pressure adsorption motor to suction the single face paper, make it flat to input the next process.
2. Installing two operate board, could be adjust on the bridge and ground.
3. Paper receiving device adopts independent frequency conversion control, manufacture enough single face paper to wave type, and make sure enough storage of single face paper, to keep in-phase different speed in manufacture.
4. With feeding paper frame on the bridge and two conveyor belt to transport the single face paper to the bridge, forming wave type to storage the single face paper.
5. The Automatic adjust the position of single face paper, reduce waste paper ratio of the manual operation.
6. Equipped block part, in order to single face paper stack well on the bridge when the machine in high speed.
Raw materials and purchased in parts
*Channel steel of main bridge：# 20 steel Origin: An Steel
*Paper-receiving unit transmitting belt: Nylon industry belt.
* Paper storage unit transmitting belt: Parallel transmitting belt
* Guiding paper engine( conversion control）： 4.0 kw 1 set continuous work Origin Wuxi
*Absorption tension engine: 4.0 kw 1set continuous work Origin Wuxi
*Paper width adjustment engine: 0.55 kw 2sets short time work Origin: Hengshui
* Bearings: Wa, Ha, Luo
* Electric appliances: Adopt OMRON Schneider and other European brands.
